Have questions? SBM sales representatives are available for live chat now WELCOME TO SBM MACHINERY!

Separator Mill For Micro Gypsum

Separator Mill For Micro Gypsum

Basic Introduction Of Micro Gypsum Separator Mill

The Micro Gypsum Separator Mill consists of a main part such as a feeding part, a discharging part, a turning part, and a transmission part. The hollow shaft is made of cast steel, the inner lining can be replaced, the rotary large gear is processed by casting hobbing, and the barrel is embedded with wear-resistant lining, which has good wear resistance. Smooth operation and reliable operation.

Reasons For Reduced Production Of Micro Gypsum Separator Mills

Excessive material in the feed port of the Micro Gypsum Separator Mill, causing the Micro Gypsum Separator Mill to stop and discharge does not meet the process requirements, less discharge, lower output, etc. This is a common problem. Why would such phenomenon happen? Let’s take a look.

The reasons for the small amount of discharge of the Micro Gypsum Separator Mill, the return of the grinding head and the decrease of the output are not unique. First of all, the Micro Gypsum Separator Mill itself cannot adjust the torque and speed according to the change of the load to cope with the excess material at the feed end. Moreover, the power capacity of the general user is limited, and the energy-saving Micro Gypsum Separator Mill may directly cause the power supply to trip if it is overloaded or blocked.

Under normal circumstances, the main motor of the Micro Gypsum Separator Mill has a large power. In order to avoid the construction of the cable is too thick and inconvenient to construct, most of the high-voltage motors are used, and the high-voltage power supply is adopted to reduce the current.

If the design of the precision current detection means on the high-voltage starter cabinet, you can know the amount of material in the mill body by detecting the current of the main motor. The less material in the simplified body, the smaller the weight, the smaller the torque required, and the main motor passes. The smaller the current is, the more material there is in the cylinder, the greater the weight, the greater the torque required, and the greater the current through the main motor.

The current detection sets the upper limit value. When the current exceeds the upper limit value, the current detecting device outputs an excessive alarm of the material in the cylinder, and sends the alarm information to the material conveying system for providing materials for the Micro Gypsum Separator Mill, and the material conveying system passes the control. The means to complete the deceleration or temporary stop to control the supply of materials.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).