Shaker Screen Manufacturers2019-07-11

Summary:How To Ensure That The Technical Specifications Of The Shaker Screen Are Up To Standard The technical indicators for Shaker Screen operation include the rotational speed, vibration force, amplitude frequency, etc. of the Shaker Screen…

How To Ensure That The Technical Specifications Of The Shaker Screen Are Up To Standard

The technical indicators for Shaker Screen operation include the rotational speed, vibration force, amplitude frequency, etc. of the Shaker Screen. Common types of faults are: the Shaker Screen cannot be started or the amplitude is too small, the rotation speed is not enough, the vibration force is weak, and the four-point amplitude is inconsistent.

1. The Shaker Screen Cannot Be Started Or The Amplitude Is Too Small

When the Shaker Screen cannot be started or the amplitude is too small, first consider whether there is electrical fault. Damage to the motor, insufficient voltage, etc. can cause malfunctions. When there is no problem in the above aspects, start with the mechanical aspect. Whether the screen surface material is seriously accumulated, if it is, it should be removed in time; if the coupling bolt on the vibration exciter is detached and the grease is agglomerated, if it is, the bolt should be tightened in time to replace the grease.

2, The Vibration Screen Is Not Enough Speed

Insufficient speed may be an electrical cause. At this time, the cause should be found and dealt with in time. It may also be that the transmission tape is too loose. At this time, the transmission tape should be tensioned.

3. The Vibration Of The Shaker Screen Is Weak

The reason why the vibration force is weak may be that the weight on the flywheel is incorrect or too light, and the weight on the flywheel should be adjusted at this time.

4, The Vibration Screen Four Points Amplitude Is Inconsistent

The four-point amplitude of the Shaker Screen may be inconsistent due to the unsynchronized operation of two exciters on the same axis or material segregation. At this time, it should be adjusted so that the two exciters work synchronously, and the segregation of materials is eliminated in time.

/// Why Choose Us?

Production Base

  • 137000 square meters Production Base in Qidong, Jiangsu
  • 67000 square meters Production Base in Jinqiao South Area of Shanghai
  • 80000 square meters Production Base in High-tech District of Zhengzhou, Henan
  • 60000 square meters Production base in Shangjie District of Zhengzhou, Henan province
  • 280000 square meters Production base in Lingang New City of Shanghai
  • 535000 square meters Production base in Xiuwu County, Jiaozuo City, Henan Province
Last:

Hot Sale

Submit Your Request Here