Have questions? SBM sales representatives are available for live chat now WELCOME TO SBM MACHINERY!

Pea Gravel Sand Crusher Machine

Pea Gravel Sand Crusher Machine

Operation Mode Of Pea Gravel Sand Crusher Machine

No matter how rigorous the quality of the Pea Gravel Sand Crusher Machine is, after a long period of operation and production, there may be unexpected failures, but more or less, the occurrence of failures is not unrelated to improper operation and maintenance of equipment. Improper operation and long-term failure to carry out equipment maintenance, is the best quality of Pea Gravel Sand Crusher Machine will also be damaged.

The operation of Pea Gravel Sand Crusher Machine includes normal switching sequence, feed quantity, discharge size adjustment, observation of distribution power and current, observation and maintenance of some abnormal phenomena during operation of Pea Gravel Sand Crusher Machine.

After the installation of the Pea Gravel Sand Crusher Machine is completed, the debugging machine should be carried out first. It is also operated on-load and on-load to test the stability of the equipment. The debugging machine is mainly used to check the bearing, fastening bolt, flywheel and other components, whether there is abnormal sound inside the machine, and to deal with the calibration of size. Note that the temperature rise of bearings shall not exceed 30 C for two hours of continuous operation without load, and that of bearings with load halo for eight hours shall not exceed 30 C. If the bearing temperature is too high, it is necessary to stop the machine in time for inspection and maintenance.

Especially in the stone production line or sand production line process start-up must be installed in order to start the process. When starting the equipment, we should observe the current of the control system. When starting the equipment, the current will rise sharply. This is the instantaneous current, which is a normal phenomenon. However, if there is a long-term phenomenon of high current, it should be immediately shut down and check the equipment and circuit. In the operation and production of equipment, if there is a fault, the same should be stopped to deal with, in order to avoid damage to equipment and delay production.

In addition, Pea Gravel Sand Crusher Machine is a high-speed processing equipment, long-term friction with materials, some wear-resistant components need to be regularly checked and replaced. Moreover, the Pea Gravel Sand Crusher Machine has strict restrictions on the size of the feed. It is strictly forbidden to enter materials larger than the size of the feed. The optimum size of the feed is 1/2-3/5 of the width of the feed port. At this time, the crushing capacity of the equipment will reach a high value. Also need to pay attention to feeding, feeding or conveying to meet the use standards of Pea Gravel Sand Crusher Machine, but also to uniform feeding, fewer feeding equipment, low output, feeding too fast will cause equipment clogging and high load operation, all without compensation.

Therefore, the operation of Pea Gravel Sand Crusher Machine needs to be treated rigorously. Moreover, the maintenance of equipment must be in place, and special personnel should be assigned to take charge of it. During the maintenance period, the whole power supply should be shut down to ensure the maintenance safety.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).