Have questions? SBM sales representatives are available for live chat now WELCOME TO SBM MACHINERY!

New Technology In Mini Stone Crusher

New Technology In Mini Stone Crusher

New Technology In Mini Stone Crusher

There is a lot of work to be done before the Mini Stone Crusher works properly. If the preceding work is not done well, the Mini Stone Crusher can not work properly. There are many problems to be paid attention to in the preceding work of the Mini Stone Crusher. Therefore, the operators should not only have professional knowledge, but also have enough patience and care. So, what needs to be done in the installation, adjustment and commissioning of Mini Stone Crusher? Let’s take a look at it.

Installation And Adjustment Of Mini Stone Crusher

  • 1. Check whether all parts of Mini Stone Crusher are complete and there is no damage. If damage is found, it should be dealt with immediately. Otherwise, it will affect the normal operation of Mini Stone Crusher. Installation can be carried out only after the integrity is confirmed.
  • 2. To install Mini Stone Crusher firmly on the basis of solid concrete, it is necessary to ensure the horizontal correction of Mini Stone Crusher, pay attention to the design of construction drawings according to the actual situation, and refer to the instructions when designing.
  • 3. Install the motor on the guide rail so as to adjust the belt tightness conveniently. When installing, it is necessary to ensure the parallelism between the rotor pulley and the motor pulley. If the balance between the two is not reached, problems will easily arise during operation, so it is necessary to ensure the accuracy of the installation of various components.
  • 4. Adjust the clearance between jaw plate and hammer of movable crusher to meet the requirement of granularity of crushed materials. When adjusting, according to the mechanical properties of materials, after adjusting, turn the rotor disk several times to check whether there is jam or collision. By adjusting the rotor to meet the discharge requirements of specific materials, the rotor speed can be increased and the gap between jaw plate and plate hammer can be smaller if the material is hard and fine. On the contrary, the rotor speed should be reduced and the gap between jaw plate and plate hammer should be increased.

Trial Operation Of Mini Stone Crusher

  • 1. No-load commissioning: After starting the motor, the Mini Stone Crusher should run smoothly. If there is abnormal sound or vibration, it should stop immediately. At this time, the temperature of the bearing should not exceed 70 ~C and the temperature rise should not exceed 30 ~C. We must pay attention to this point. If the temperature is not within the normal range, one point should be taken accordingly. Measures: empty running time is 2-4 hours, after commissioning, check the connection loosening everywhere.
  • 2. Load operation: Load operation must be completed before load operation, and on the basis of good idle operation; at this time, the temperature rise of Mini Stone Crusher bearings does not exceed 40 C, and the temperature does not exceed 80 C; there must be no powder impurities in the sealing and connecting parts; Load operation must be continuous for 5-6 hours. Only in this way can it be confirmed that the operation is normal, and then it can be put into operation.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).